Manual Rotary Drum Pump With 2″ Bung

Manual rotary drum pump for 55-gallon (205 L) steel and plastic drums, moving about 10 gallons per minute (37.85 L/min) with a simple hand crank. Drop the polyethylene suction tube into the drum, thread the adapter into the 2″ bung, and turn the handle clockwise to dispense. No electricity or air supply is needed, so it works in a shop, a barn, a job site trailer, or anywhere a drum ends up.

It’s built for oils, antifreeze, degreasers, and other non-corrosive fluids, making it a handy pump for fleet maintenance, farm equipment upkeep, and small industrial transfers into buckets, cans, or machinery reservoirs.

Specifications

Using and Caring for the Pump

Place the pump in the drum, screw the adapter onto the bung, and crank clockwise. The pump needs lubrication to run smoothly, so keep it serviced if you use it often. Clean the tube between products to prevent cross-contamination.

Thread note: the adapter is a 2″ BSP thread. Many US drums use 2″ NPS or buttress bungs, so confirm your drum’s bung thread or use a suitable adapter before ordering.

How It Compares

The aluminum hand rotary drum pump is a metal-bodied alternative suited to diesel, gasoline, and water. For small, controlled doses from smaller containers, see the piston-type manual transfer pump. Browse drum pumps and accessories.

FAQ

What liquids can I pump?

Oils, antifreeze, degreasers, and other non-corrosive fluids.

Will it fit my drum?

It fits 55-gallon drums with a 2″ BSP bung. Check your bung thread first, as US drums often use NPS or buttress threads.

Is a drum included?

No, the pump ships on its own.